Team5hite Large Scale Racing

Jamie · Joined: 17 Aug 2008 Posts: 104 Location: suffolk

I've got a hormann manifold with a marder samba pipe, my current bit of tube has broken but not sure what would be a suitable replacement as the samba part is larger than the hormann manifold so it has to be quite flexible. What do other people use or suggest?

thanks

Jamie

tazman · Posted: Mon Aug 24, 2009 10:26 am Post subject:

USE 1/8 SILICON EXHAUST COUPLER COME IN VARIOUS COLOURS BIT TIGHT BUT GO ON WITH GENTAL PURSUASION

_________________

PG RACING HT2 TK10 TEAM DRIVER 2010
prototype parts are the future

Jamie · Joined: 17 Aug 2008 Posts: 104 Location: suffolk

Thanks found a nice yellow ansmann one that looks similar to the original one I had on it.

Ric ashman · Posted: Mon Aug 24, 2009 8:10 pm Post subject:

ha no jamie just give the pipe to me Exclamation

Oddified · Joined: 26 Mar 2008 Posts: 395 Location: Lancashire

Try and find high temp silicone or use the black ptfe exhaust joiner (fg/harm/mielke etc etc), the joiners for 1/8th aren't really upto the temp needed for petrol engines (nitro engines exhausts run cooler), most silcone joiners are only good for 380 - 400 deg Idea

Ian

_________________

Jamie · Joined: 17 Aug 2008 Posts: 104 Location: suffolk

Oddified wrote:

Try and find high temp silicone or use the black ptfe exhaust joiner (fg/harm/mielke etc etc), the joiners for 1/8th aren't really upto the temp needed for petrol engines (nitro engines exhausts run cooler), most silcone joiners are only good for 380 - 400 deg Idea

Ian

I'll see how this one goes as I had one on my car for half a year before this one broke, but if this one breaks I try to get a better one.

Quote:

ha no jamie just give the pipe to me

Ummm, I think i'll give that a miss thanks, it's the only desirable part on my car..... Shocked